CX500 GL500 650 Global

1:Some years ago 'twas a Sunday.One of my side cans has lost it's grommets.I spotted an old oil filter and thought,Hmmmm.I bet I could use the rubber grommet out of the oil filter cut-down to make one for the Side cans.Cut to just under half and super-glued in it's still doing a good job over 4 years later



2:A small sliver of the oil filter Grommet sanded and stuck to the small part of the Throttle lever that actuates the the Front Brake light switch compensated for it being a bit slack and making the rear light flick on and off


3:The Fuel Tank filler cap on the tank I used recently was vibrating a bit at certain revs even with it's spring loaded thing that holds the Cap up sooo......

Oil Filter Grommet to the rescue.

Bumping