Cleaning the engine

Anything you like really.Wheels/Tyres/Tanks/Brakes e.g running gear etc :)
Forum rules
Use Search function for subjects

No Racism.Slanging Matches(unless witty and funny :)
No spamming.Anonymous posting disabled.Ad bots pay for the site.

Cleaning the engine

Postby <0469.html?mode=viewprofile&u=931">cdyoung1985 » Thu Jan 27, 2011 8:01 pm

I want to clean the engine real nice to make sure it isn't full of sludge and the pistons and valves are clean, is there a good way to do this? I've heard you can run diesel instead of oil, run the bike for 20 minutes or so, let it sit overnight, then drain it and put in oil... Would this take life from the motor being that it's running without oil? Also do you have to flush it out? I want it to run better and last longer, but if this is likely to reduce her life span I won't bother.....
I ride an 81 CX500C and have an 80 parts bike, for sale, also 83 GL650I in pieces going together once I get the parts I need...
<0469.html?mode=viewprofile&u=931">cdyoung1985
 
Posts: 13
Joined: Thu Jan 27, 2011 12:10 am
Location: Southwest MI

Re: Cleaning the engine

Postby Gman » Thu Jan 27, 2011 9:25 pm

With running engines it's dangerous to flush them as it can remove needed build ups around the big-end/main bearing shells.The safest way to clean and engine out is to use some of the cheapest 20w mineral oil from the supermarket.Run it for say 50 miles nice and hot,then dump and put fresh oil and filter in.Most of us now use 15w40 made for diesel car engines from the supermarket.It's cheap,better fro the engine/gearbox and is of a much higher spec than standard oil and even better fro our older bikes than Fully synthetic oils.
Changing the oil+filter between 3,000/4,000 miles will make the engines last a long long time :)
User avatar
Gman
Site Admin
 
Posts: 1140
Joined: Thu Jul 24, 2008 8:11 pm
Location: Hull.Yorkshire.UK.2x1980 CX500ZABs:Citroen ZX TD(250,000 miles)

Re: Cleaning the engine

Postby <0469.html?mode=viewprofile&u=931">cdyoung1985 » Thu Jan 27, 2011 9:33 pm

Admin wrote:With running engines it's dangerous to flush them as it can remove needed build ups around the big-end/main bearing shells.The safest way to clean and engine out is to use some of the cheapest 20w mineral oil from the supermarket.Run it for say 50 miles nice and hot,then dump and put fresh oil and filter in.Most of us now use 15w40 made for diesel car engines from the supermarket.It's cheap,better fro the engine/gearbox and is of a much higher spec than standard oil and even better fro our older bikes than Fully synthetic oils.
Changing the oil+filter between 3,000/4,000 miles will make the engines last a long long time :)

So the diesel car oil would be better than using some simple 20w50 motorcycle oil? I've always just used what the label on the swing arm says, but what Honda knew 30 yrs ago is different than what people know now
I ride an 81 CX500C and have an 80 parts bike, for sale, also 83 GL650I in pieces going together once I get the parts I need...
<0469.html?mode=viewprofile&u=931">cdyoung1985
 
Posts: 13
Joined: Thu Jan 27, 2011 12:10 am
Location: Southwest MI

Re: Cleaning the engine

Postby Gman » Fri Jan 28, 2011 6:23 pm

User avatar
Gman
Site Admin
 
Posts: 1140
Joined: Thu Jul 24, 2008 8:11 pm
Location: Hull.Yorkshire.UK.2x1980 CX500ZABs:Citroen ZX TD(250,000 miles)


Who is online

Users browsing this forum: No registered users and 1 guest